Skip to content
How it works

Your tags either load. Or they quietly don't.

Ad blockers can prevent scripts from loading or stop their measurement requests. Introtrace serves blocked scripts and relays blocked events through its proxy. Add one script tag to get started.

The problem

When the tag layer is blocked, everything you put in it goes dark

Filter lists don't target your analytics specifically — they target the domains almost every marketing tool loads from. One rule, and every tag that depends on that domain stops firing for that visitor.

No visible page error or build failure is required. The visitor shows up, browses, maybe converts, and your reports simply never register it happened — leaving you to allocate budget against a dataset with a hole whose edges you can't see.

29.5%

Of internet users worldwide

use an ad blocker — roughly 1.77 billion people.

Backlinko, Q2 2025 ↗
32.5%

Of US internet users

used an ad blocker in Q2 2025; this is adoption, not a site’s analytics loss rate.

Backlinko, Q2 2025 ↗
25–45%

Of your visitors, if you sell to developers or B2B

Fashion and mobile-first ecommerce typically 8–15%. Directional — measure your own.

Blockthrough / PageFair ↗
2 paths

To verify in your browser

Check the script download and the outbound event request separately.

Recovery setup guide ↗

It's rarely just analytics

Most teams route far more than measurement through GTM. Block the container, and everything riding on it goes dark at the same moment:

GA4Meta PixelGoogle Ads conversionsLinkedIn InsightTikTok PixelHotjar / heatmapsA/B testingHubSpotChat widgetsAffiliate tags

The analytics gap is usually what teams notice first, since that's the report somebody actually opens on Monday. Everything else fails right alongside it, just as quietly.

Missing visitors can bias your reports

Your blocked audience may differ from the visitors represented in your analytics. Compare traffic sources and test configurations before assuming the missing visitors are your highest-value customers.

Attribution is where it really breaks

The gap isn't random, so it doesn't average out — it concentrates in whichever channels bring you the most technical audience. Those channels report worse than they perform, and the budget moves away from them. You may be cutting what's working.

The mechanism

How the analytics proxy works

Introtrace serves supported blocked GA4 and GTM scripts and relays blocked event requests through another host. Your existing tags still create the events and choose their destination.

Diagram showing blocked consent, tag manager, analytics script, and event requests, with an alternative proxy route that serves scripts and relays events to analytics platforms.

An analytics proxy sits between the browser and the analytics provider. For a supported blocked script, Introtrace fetches the script through its proxy so the browser can load it. For a supported blocked event request, Introtrace relays the request to its intended destination.

If you are looking for a Google Analytics reverse proxy or a GA4 proxy, check both halves of the setup: serving the tag is useful only if its measurement requests can reach GA4. The same distinction applies to a GTM proxy: loading the container does not by itself establish that every tag inside it delivered its events.

Consent is decided by your CMP, never by Introtrace. Denied consent may prevent tags from loading or change what they send, depending on the implementation. Verify that behavior independently of recovery.

Shared host or a custom tracking domain

Recovery uses cdn.introtrace.com by default. Paid plans let you configure a CNAME for a subdomain you own, such as analytics.yoursite.com, then copy its script tag from Settings. This gives the recovery route a first-party hostname. A custom domain does not make tracking immune to blockers; test the hostname, script loading, and event delivery with the browser settings your visitors use.

To verify your setup, follow the GA4 recovery checklist. If you see a failed request, use the GA4 blocked-request guide or the GTM container diagnostic to identify what stopped.

Two things get blocked, and they fail differently

The script never arrives

A filter list blocks the domain a tool loads from — googletagmanager.com, cdn.cookielaw.org, static.hotjar.com. The browser requests it, the request is dropped, and the tool simply isn't there. No container initialises, no banner renders, no widget appears. Introtrace serves these from cdn.introtrace.com (or your own subdomain, on a paid plan) so the script arrives and runs normally — including gtm.js, which brings your whole container back with it.

The event never lands

The script loaded fine, but the outbound call to GA4, Meta, or Google Ads is blocked on its way out. The visitor's action happened; the record of it didn't. Introtrace detects the dropped call and relays it through the shared CDN, or your configured subdomain on a paid plan, to the platform.

Clean data

Suppress bot traffic from your analytics

GA4 filters bots on the IAB list by default, and Cloudflare catches obvious crawlers at the edge. What gets through is the harder category: AI-driven scrapers, headless browsers mimicking real users, and custom tools built specifically to evade standard filters.

These inflate session counts, distort engagement metrics, and quietly skew A/B test results — without triggering any existing alarm.

51%

Of all global web traffic was non-human in 2024 — bots exceeding humans for the first time in a decade

Imperva Bad Bot Report, 2025 ↗
37%

Of internet traffic came from bad bots in 2024, up from 32% in 2023 — sixth consecutive year of growth

Imperva / Thales, 2025 ↗
33%

Of retail web traffic in Imperva’s 2024 data came from bad bots

Imperva Bad Bot Report, 2025 ↗
8×

Automated traffic grew about eight times faster than human traffic in HUMAN’s observed data for 2025

Human Security, 2026 ↗

Bots get filtered before they count

Crawlers, headless browsers, synthetic visitors — when Introtrace flags one, the analytics signal stops there. It never reaches GA4, Meta Pixel, or anywhere else, Detection is heuristic; other bots may still reach your reporting tools.

Check bot filtering against your own data

Compare recorded activity with known test traffic and your other bot filters. Heuristic detection can miss bots or flag legitimate visits, so it does not establish a bot-free dataset.

Alternatives

Introtrace vs server-side GTM, Meta CAPI, and enhanced conversions

Server-side GTM, Meta Conversions API, and Google Enhanced Conversions each solve part of this problem too. Here's how they compare.

Server-side GTM

Strengths

Full control over data routing. Works well for complex tag setups and data enrichment.

Trade-offs

Requires provisioning and maintaining cloud infrastructure. Costs depend on traffic, deployment, and ongoing operational needs.

Right for teams with a dedicated data engineer and existing GTM expertise.

Meta CAPI / Google enhanced conversions

Strengths

Platform-native. Improves attribution directly in Meta Ads and Google Ads dashboards.

Trade-offs

Platform-specific — CAPI only helps Meta, Enhanced Conversions only helps Google. Requires backend integration for each platform separately.

Right if you run heavy spend on one or two platforms and have backend access.

Introtrace

Strengths

A single script tag supports tools such as GA4, GTM, Meta Pixel, TikTok Pixel, and LinkedIn Insight Tag. Introtrace serves blocked scripts and relays blocked events through the shared CDN, with a custom subdomain available on paid plans. You do not need to host a server.

Trade-offs

Only recovers signals that are actively blocked client-side. If you've already fully implemented server-side tracking, the marginal lift is smaller.

Right for mid-market teams running paid media without a dedicated data engineering function.

Run them together

If you're already running sGTM, Introtrace can help serve a blocked client-side loader and relay supported events to your server container. Verify both requests in your setup. Compare Introtrace with server-side GTM →

For browser-generated events, check the script download as well as the outbound measurement request. A blocked loader can prevent an event from being created before a server container has anything to process. Verify both parts when combining recovery with server-side tracking.

The outcome

Analytics you can act on

Recover the signals and strip out the bots, and marketers finally see true campaign performance. Ecommerce teams see real conversion behaviour. SEO and digital leads end up optimising for people who are actually there.

Performance marketingEcommerceSEOCampaign managementDigital analytics

Frequently asked questions

What is an analytics proxy for GA4 and GTM?

An analytics proxy sits between your browser and an analytics provider. Introtrace uses this approach to serve supported blocked Google Analytics scripts and GTM containers, and to relay supported blocked event requests. The script-serving part acts as a Google Analytics reverse proxy; event delivery also needs a working relay route. Verify both script loading and event receipt in your analytics property.

Does Introtrace interfere with cookie consent banners?

Your consent platform and tag configuration still govern what may be sent. Introtrace can serve a supported blocked consent-platform loader, but it does not collect consent itself. Test accepted and denied choices after installation.

Can Introtrace help if my cookie banner itself is blocked?

It can serve supported blocked consent-platform scripts through the recovery proxy. Install Introtrace independently in the page head, before analytics and consent scripts, then verify that the banner renders and applies the visitor’s choice.

Should I load Introtrace through GTM?

Load it directly in the page <head>, ahead of GTM and your CMP snippet. Deploy it as a tag inside GTM instead and it inherits GTM's fate: block the container and Introtrace never loads either, so it has nothing left to protect. Going first is what keeps it standing in exactly the situation it exists for.

How does Introtrace detect that an analytics signal was blocked?

It watches outbound requests to known analytics endpoints — GA4, Meta Pixel, GTM, and similar. When one of those fails to complete because an ad blocker intercepted it, Introtrace catches the failure and relays it through the proxy, or, on a paid plan with a CNAME configured, through your own subdomain.

Can I use a custom tracking domain for first-party tracking?

Recovery requests use cdn.introtrace.com by default. Paid plans support a CNAME that routes requests through a subdomain you own, such as analytics.yoursite.com. Configure the domain in Settings, then copy its script tag. That provides a first-party request hostname; it does not guarantee that every blocker will allow the request or change your consent requirements.

Do I need to change my Google Analytics or GTM setup?

Nothing about your GA4, GTM, or pixel configuration changes — no re-tagging, no container edits. The one thing that does need to move is the Introtrace tag itself: place it in the page <head>, ahead of GTM and your CMP snippet, so it's still standing when those get blocked.

How does Introtrace compare to server-side GTM and Meta CAPI?

A server container processes and routes events; Meta Conversions API sends server events to Meta. Introtrace serves supported blocked browser scripts and relays blocked requests. These approaches can be combined, but verify delivery, consent, and duplicate handling in your configuration.

How does Introtrace handle bot traffic?

Bot detection uses signals such as known crawler user agents and browser characteristics to identify automated traffic. Detection is heuristic and cannot identify every bot. Check your own analytics and filtering configuration when evaluating its effect.